Find Low Pressure Venturi Dust Collector, Dust Collector With High Quality, WC Type Dust Collector on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Dust Collector > WC type low pressure Venturi dust collector

WC type low pressure Venturi dust collector

  • WC type low pressure Venturi dust collector
  • WC type low pressure Venturi dust collector
  • WC type low pressure Venturi dust collector
  • WC type low pressure Venturi dust collector

WC type low pressure Venturi dust collector

    Payment Type: L/C,T/T
    Terms of Trade: FOB,CIF
    Min. Order: 3000 Others
    Delivery Time: 30 Days
    Packaging: bag
    Productivity: 1000
    Brand: youjian
    Transportation: Ocean,Land,Air
    Place of Origin: Botou city, hebei province, China
    Supply Ability: 10000
    Port: Xingang,China

Basic Info

Model No.: BOOD-037

Product Description

Introduction of WC type low pressure Venturi Dust Collector:

The WC type low pressure Venturi dust collector is a kind of high efficiency wet dust collector, which is studied and designed by the Beijing non-ferrous Metallurgical Design and Research Institute, which is based on foreign equipment and related materials. After several years of application practice, it is proved that the equipment can be widely applied to occasions where dust removal efficiency is high and can also be used for washing and purifying harmful gases.

Structure and principle of WC type low pressure Venturi dust collector:

The principle is that the dusty gas in the Scriptures is exposed to the water flowing down the water wall of the Venturi tube. The water droplets are spatter at the throat of the throat, resulting in the formation of fine water droplets. The dust is caught by the water droplets by the collision with the water droplets, or directly into the water surface of the sedimentation tank because of the aggregation of the water or the agglomeration of the larger dust particles. Less particles are trapped by the gas again in the cyclone. The cyclone is dehydrated at the same time.

WC type low pressure Venturi dust collector operation:

1. Due to water removal, the operation should be antifreeze.

2. Adjust the valve on the water supply pipe and use the water hole to send out 2cm high water column.

3. Adjust the opening degree of the valve at the bottom of the dust collector, so that there is a small amount of water overflow in the overflow pipe during operation.

4. It is water saving and can be recycled.

WC type low pressure Venturi dust collector used:

The dust collector has been identified and identified as follows: "reasonable design, advanced performance, qualified quality and good user response".

The equipment has been tested by artificial dust removal in the manufacturing plant. The Beijing Institute of non-ferrous metallurgy design and research and the Anshan Iron and Steel Institute of labor and hygiene have carried out the test. The efficiency of dust removal is 98-99.88%.

The dust removal efficiency of a copper mine and basic ceramics was measured. The dust removal efficiencies were 99.17% and 99.99% respectively.

At present, this kind of dust collector is widely used in ore dressing plant, ceramic factory, printing and dyeing plant, copper mine, lead zinc mine, pit crater, high frequency porcelain parts factory, gold mine, foundry workshop, cremation plant, and boiler dust removal.

WC type low pressure Venturi dust collector features:

1. The equipment is actually two stage dust removal, and the efficiency is up to 99%.

2, the resistance of the dust collector is 127mmH2O, and the power consumption is less.

3. The highest concentration of dust in the entrance can reach 35g/m3, and the adaptability is strong.

4. The components are standardized and the cost is low.

5, due to the formation of a water film in the Venturi tube, the wear is small and the service life is long.

6, tight hole, easy to open. As long as the hole is opened, all parts inside the equipment can be touched to facilitate cleaning.

7, the outlet diameter is large, and the water quality requirements are very low, and no blockage is required.

8, water pressure of water supply is more than 0.1kg/cm2.

9, small footprint, easy installation, reliable operation, almost no maintenance, no vulnerable parts.

10, the outlet gas has no water phenomenon.

 Botou youjian environmental protection equipment co., LTD. is a professional company with the development, design, production, installation and service of environmental engineering and environmental protection equipment. Company is located in the coronal has the reputation of "hometown of pears" botou city, hebei province, the company in the east near the beijing-shanghai railway, beijing-shanghai high-speed and 104 national highway, 106 state road and west stone yellow high-speed, the geographical position is superior, the transportation is very convenient. Our company adheres to the tenet of quality first, users first, now reside in the domestic high grade, high quality, high performance, environmental protection equipment technology development and production base, production volume in the national top Xu in the industry. Main technical products are: cloth bag Dust Collector, single filter, cyclone, and electrostatic precipitator and wet dust collector, dust remover, the filter cartridge dust collector, injection machine and other kinds of environmental pollution control technology and equipment, dust bag, dust skeleton, electromagnetic pulse valve, discharge feeder and other accessories, products are widely used in metallurgy, electric power, building materials, chemical industry, etc. Company always adheres to the philosophy of science and technology innovation, work closely with scientific research units and the major design institute, has developed 30 many kinds of environmental protection technology and products, more than 20 projects to undertake all kinds of large-scale environmental engineering, the products sell well in more than 30 provinces and cities and exported to the United States, India, Vietnam and other countries and regions, has won the broad masses of users and design units. Among them, "pulse Bag Filter" and "high voltage electrostatic precipitator" were first approved by the provincial and national environmental protection bureau, and won the provincial and advanced environmental science and technology awards. We will take this as a new starting point and continue to work on the development and development of environmental engineering and environmental protection products. We will continue to maintain the advantages of high technology level, high quality of products and good reputation of enterprises. Establish the correct scientific outlook on development, constantly improve the overall quality of the company, enhance the market competitiveness, and push the company to a new level. In the development process, the company adheres to the combination of scientific research, design and production services, and takes the market with new mechanism, new thinking and new technology, and has achieved remarkable results. Company will continue to cooperate with the social from all walks of life ability, and sincerely hope friends from all walks of life will, as always support and concern the development of our company, for the development of the construction of a harmonious society, for the environmental protection enterprise strive brilliant tomorrow! Enterprise tenet: the lowest price but the best quality!

Company Info

  • Company Name: Botou Youjian Environmental Protection Equipment Co. LTD.
  • Representative: douliangliang
  • Product/Service: Dust Collecter , Industrial Dust Collector , Dust Collector Fittings , Cyclone Dust Collector , Desulfurization Collector , Filter Press
  • Capital (Million US $): 1000000RMB
  • Year Established: 2014
  • Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
  • Export Percentage: 11% - 20%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 3
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: Shiying industrial zone, botou city, hebei province, China
  • Contact Person: Mr. Dou Liangliang
  • Tel: 86-0317-5660622
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters