Sainless Steel Precision Bag Filter

SS304/316L multi-bag precision filter

1. Product Description:

Bag Ss precision filters stainless has many advantages, such as reasonable structure, good sealing, strong circulation, easy operation and so on. Especially, the filter bag side leakage probability is small, can guarantee the filtration accuracy correctly, and can change the filter bag quickly, make the operation cost reduce. The inner and outer surface of the filter precision filtersis solved by mechanical sandblasting polishing, which is average and easy to clean.
The filter method adopted by the Bag Filter is either the side in or out, or the side in and out.The filter liquid medium is pressed into or pumped into the bag steel precision filters. barrel through the pressure in the pipe. The liquid medium to be filtered supports the filtration of the filter bag supported by the blue filter through an electropolishing punching hole, and the changed solid liquid reaches the result of the liquid medium being filtered respectively.

2. Main advantage:

1.Small probability for side-bag leakage , which effectively guarantee the filtering quality.

2.Bag type filter can bear greater working pressure, it is of small pressure loss,low operation cost and obvious energy saving .

3.Accuracy of filtration bag increased continuously, it could reach 0.5 μm at most.

4.Bag type filter large handling capacity, small volume, containing a large quantity of pollutants.

5.Based on the working principle and structure of Bag type filtering system,which is convenient to replace the filter bag and without cleaning,and time saving and labor saving.

6.Filtration bag could be use repeated after cleaning to save cost.

7.bag filter application scope is broad, with flexible operation and multiple installation .

3. Specifications:

Technical parameters	Design pressure: 0.96MPa 30min
	Maximum working pressure:0.60MPa
	Surface smoothness:Ra≤0.2
	Design flow rate:Ra≤0.2
	Inlet&outlet type thread or flange
	Type:single bag & multi bag filter housing
Designed for bag filtration system	Different kinds of bag support baskets to fit for
	wide range of filter bags
Complete stainless steel structure	Made of 100% SUS304, SUS316L, PP
Easy to clean	Surface is mechanical polished or sand blasting passivation.
	dished end to aid clean down

Specifications for single bag filter housing:

No.	Size	Diameter	Length	inlet&outlet	Filter bag	Flow rate
	Code	(mm)	(mm)		size	(m/h)
1	DT1	220	550	2" thread, clamp, flange	1	20
2	DT2	220	950	2" thread, clamp, flange	2	40
3	DT4	130	650	1" thread, clamp, flange	4	10

Specifications for multi bag filter housing

No.	Size	Diameter	Length	inlet&outlet	Filter bag	Flow rate
	Code	(mm)	(mm)		size	(m/h)
1	DT2-2	400	1600	3" thread, clamp, flange	2*2	80
2	DT2-3	500	1600	3" thread, clamp, flange	2*3	120
3	DT2-4	550	1600	4" clamp, flange	2*4	160
4	DT2-5	600	1600	4" clamp, flange	2*%	200

NOTE: Can be customized according to customer's requirements.

Contact us if you need more details on Precision Bag Filter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about SS Bag Filter、Precision Bag Filters. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Water Filters > SS Precision Filters